Concrete Floor Installation in Atascocita TX - a solid base ready for tile or coating
Worried a slab floor will crack or let moisture ruin your flooring? We build the base and slab so what goes on top holds up.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
What does it take to put in a concrete floor that lasts?
Concrete floor installation in Atascocita means laying a slab on packed ground as the floor of a room, shop or addition, with joints cut so cracks form where we choose. You end up with a hard, flat base ready for tile, wood, carpet or a coating.
Most people who call about a floor are adding a room, closing in a space or building a shop, and they want a slab that stays flat and doesn't ruin the flooring they put on it. If you're building a whole house, that's a slab foundation job instead. We're based in Atascocita and work across the cities around it. The price turns on the size of the floor, how much digging and packing the ground needs, how thick the slab is and whether it carries steel. The schedule turns mostly on weather and on whether your lot needs flood paperwork before we pour. I'll give you a written estimate that spells out what's included and what isn't, so you know your own number before anything starts.
How can you tell a concrete floor has a problem?
Cracks that keep widening
A crack that opens wider every season, or one side sitting higher than the other, usually means the ground under the slab moved because it was never packed. Patching the top won't stop it, and the longer you wait, the more the flooring on top cracks along with it.
Flooring that lifts or bubbles
When tile pops loose, vinyl bubbles or wood flooring smells musty, it's usually moisture coming up through a slab with no barrier or one in the wrong spot. Leaving it lets the glue fail and gives mold time to start under the covering.
A dusty, flaking surface
If the top of the floor wears to powder or flakes when you sweep, the surface was usually poured in the heat or finished too wet, so it came out weak. Paint and coatings won't hold on a top like that, and it only gets worse with traffic.
How we do concrete floor installation
It starts with a question. Tell us what flooring or coating goes on top, because that decides where the vapor barrier, the moisture sheet under the slab, sits. Then our crew digs out the soft dirt, packs the subgrade, which is the ground the slab sits on, and checks that water runs away from the house instead of toward it. We set the forms and steel, I check the grades before the truck comes, and we pour early in the day so the top isn't baking while we finish it. We cut control joints, shallow saw lines that give shrinkage cracks a place to go, at the right time so cracks land where we want them, and then we let the slab cure, the wait while concrete gains strength, before anyone loads it. If the budget gets tight, I'd rather you skip a fancy finish than cut the base, because you can redo a top later but you can't fix what's under a poured slab.
A new floor often brings other pours with it. If the room opens toward the pool, we can pour concrete pool decks that slope away from the new space, and if the floor sits above the yard, you'll want concrete steps at the door.
Steel-reinforced slab
Rebar, the steel bars set inside the slab, suits floors that carry heavy cabinets, equipment or a vehicle. It costs more, but it holds any cracks tight instead of letting them spread.
Plain slab
A slab without steel suits a light-use room or a small space where the load stays low. It keeps the cost down, and the base and joints do most of the work.
Finish matched to your covering
A smooth troweled top suits tile, vinyl, wood or an epoxy coating, and we plan the barrier around what you pick. Tell us early so the finish and the slab height fit the flooring.
Get a written estimate for your concrete floor
We reply within one business day. I come out, measure the space and look at the ground, then you get a free written estimate showing what's included and what isn't, with no pressure to book.
(713) 325-6337- Based in
- Humble, TX 77346
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
What happens after you call about a concrete floor in Atascocita?
Here's how a floor job runs from your first call to the final walk-through, and who you'll be dealing with at each step.
Call or send the form
Call (713) 325-6337 or send the form, and we'll set a time for me to come out. It helps to have the floor size, the flooring you plan to put on top and whether your lot is in a flood zone.
I measure and check the ground
I measure the space, look at the ground and where the water goes, and check which office covers your address. Then you get a written estimate that lists what's included and what isn't, so the price doesn't surprise you later.
Our crew preps and pours
Once you're ready and any county paperwork is in place, our crew digs out and packs the base and sets the forms and steel. I check all of it before we pour.
Walk the finished floor together
When the slab has cured, we walk the finished floor with you. You'll see where the joints are and why they're there.
Why Atascocita homeowners call T&J for a concrete floor
I check the steel before pouring
I come out myself to measure, and I'm on site while our crew works, checking the forms and steel before we pour. A mistake caught before the truck shows up is easy to fix, and one caught after is in your slab for good.
Years running a local crew
Before I started T&J in Atascocita in 2023, I spent years as the right hand to another concrete contractor around here, running the crew and checking grades and forms. You get someone who has already seen where floor jobs go wrong.
We're licensed and fully insured
Our crew is covered while it works on your property. If something gets damaged during the job, our coverage answers for it, not yours.
On a floor, the ground under it matters more than anything on top, so tell us about your project and I'll come out and look at it.
Pouring concrete floors in Atascocita and the cities around it
Some lots fall under Harris County and some under a city, so I check which office covers your address before we plan the job. If your property sits in the county's flood hazard area, Harris County requires a residential permit and floodplain compliance for any work. It also calls for an Elevation Certificate, a record of how high the structure sits, before the slab is poured, and another one for the finished floor afterward. That first certificate comes before the pour, so we build it into the schedule and help you with the paperwork. If you're not sure about your lot, you can call the county's permit office at 713-274-3900 for an unofficial answer.
Heat is the other thing we plan around. One Texas testing firm reports afternoons above 90°F across the Houston area from April through October, and wind and sun dry fresh concrete faster than a calm, humid day at the same temperature. That's why we start pours early and watch the forecast, and we work the same way on jobs in Humble and Baytown.
Questions about concrete floors in Atascocita
How much does a concrete floor cost in the Houston area?
Concrete slabs in the Houston area usually cost about $4 to $11 per square foot for the slab itself. Where yours lands depends on the base work, the thickness and whether it's reinforced, since reinforced slabs cost more per square foot than plain pads. Your free written estimate gives you your own number.
Will my new concrete floor crack?
Some small cracks should be expected on any slab, even with joints set close together. Joints are usually cut within 4 to 12 hours of the pour, depending on the heat and the mix, so shrinkage cracks follow those lines. Steel won't stop cracks, but when it's sized and placed right, it keeps them tightly closed.
How long does a new concrete floor take to cure before I can use it?
You should be able to walk on it within about 48 hours, and it's worth waiting a week before putting heavier loads on it. Full curing takes about a month, so plan the move of heavy furniture, cabinets or equipment around that wait.
Where should the vapor barrier go under a concrete floor?
If you're putting down flooring or a coating, the barrier protects it best when it sits right against the bottom of the slab. The industry's floor guide also says the ordinary plastic sheeting used in the past shouldn't be relied on for this. Ask any contractor where the barrier will sit and what it's made of before work starts.
What does Harris County require if my property is in the flood hazard area?
Harris County requires a residential permit and floodplain compliance for any work there, plus the two Elevation Certificates covered above. I check your address before we plan the job, so the first certificate is handled before we set a pour date.
What is the best way to reinforce a concrete floor?
For a floor that carries real weight, rebar is the better pick, because fiber mixed into the concrete helps it resist cracking but adds no structural reinforcement. Fiber can make sense in a plain slab for light use, and I'll tell you at the estimate which one your floor needs.
Concrete work that often goes with a new floor
Concrete pool decks
If your new room or patio door opens toward the pool, a deck that drains away from the house keeps splash and rain off the new floor.
Concrete steps construction
When a new floor sits higher than the yard, solid concrete steps at the door make getting in and out safer than a stack of pavers.
Cities we serve for concrete floors
T&J Atascocita Concrete Construction is based in Atascocita, TX, and pours floors across the cities around it, including Humble and Baytown. These 12 cities have their own page on our site, and if you don't see yours, call and ask.
Humble, TX
Plan your new concrete floor with us
Calling before you order flooring lets us plan the barrier and the slab height around what you're putting on top.