Concrete Contractor in Channelview, TX - Slabs Built to Shed Water on Clay
T&J Atascocita Concrete Construction, a concrete contractor based in Atascocita, TX, pours driveways, patios, slabs and footings in Channelview. We dig out and pack the base, then slope each slab so water runs off.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
Channelview houses, driveways and the ground under them
Channelview sits in Harris County on the east side of Houston. Most of our calls here come from homeowners whose driveway, patio or walk has cracked, dropped or started holding water. A lot of these houses still have the flatwork they were built with, the flat pours like driveways, walks and patios, so that concrete has had years to settle. Small businesses here also call us for lots and footings, and we do the same work next door in Cloverleaf and east in Baytown.
The ground here is low and flat, so water doesn't run off a yard on its own. The slope we build into a slab does the draining, so I set it before we decide anything else.
Concrete work we do in Channelview
Concrete driveway building
Most driveway calls here start with a cracked or sunken slab. We tear it out, pack a new base and pour it sloped toward the street.
Concrete patio construction
A backyard patio on flat ground needs a built-in fall away from the house, or rain sits at the back door. We set that slope before we pour.
Stamped concrete services
Stamped concrete gives a patio the look of stone or brick. The pattern won't hide a slab that settles, so the base under it gets the same work.
Concrete sidewalk building
We replace walks that have heaved or dropped, pitch them so rain runs into the yard, and give them a broom finish, light ridges that grip wet shoes.
Garage floor concrete
Garage floors here often crack where the slab settled near the door. We break out the bad section or the whole floor and repour on a packed base.
Decorative concrete
Color, exposed aggregate and scored patterns dress up an entry or patio. We plan the scoring lines to land where the slab would want to crack anyway.
Concrete retaining walls
Here a short retaining wall usually holds back a raised bed or a step in grade. We leave drainage behind it so trapped water doesn't push it over.
Concrete floor installation
Shops, sheds and add-on rooms need an interior slab that stays flat for shelving and machines. We pack the base and set the steel before the pour.
Concrete pool decks
A pool deck gets splashed all summer, so we pour it sloped away from the pool and give it a texture that grips wet feet.
Concrete steps construction
Front steps that have pulled away from the house or tipped forward usually sank because of what's under them. We dig and pack that before forming new ones.
Slab foundation building
A slab for a house, addition or garage is only as good as the ground under it. I check it, the forms and the steel before we pour.
Foundation installation
For sheds, additions and outbuildings, we lay out and pour the foundation the plans call for, with the steel set and checked before any concrete goes in.
Concrete parking lot building
Business owners here call us for lots that drain and stand up to delivery trucks. We build the base heavier and grade it to shed water.
Concrete footings
Footings carry porches, carports, columns and walls. We dig them to firm soil, below the soft top layer, so the load doesn't ride on soft, wet ground.
Foundation raising
When part of a slab or foundation has dropped on shifting ground, I look at whether raising it makes sense or replacing it is the better buy.
Concrete cutting
We saw out a damaged section or an opening for a door or plumbing line, so you don't have to tear out the whole slab.
Get a free on-site estimate for your Channelview concrete job
We reply to every form within one business day to set a time for me to come out. The estimate is free, done on site and put in writing, with no pressure to book.
(713) 325-6337- Based in
- Humble, TX 77346
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 8 AM–9 PM
Permits, paperwork and price on a Channelview job
Channelview is in Harris County, and the Harris County Engineer's office issues the construction permits for building, altering or repairing structures here. Some lots around here fall under the county and some under a city, so I check which office covers your address before we plan the job. When a permit is needed, we help you with the paperwork and set the pour date after it's in hand. You can check us out the way you'd check anyone doing business in the county, because the Harris County Clerk keeps assumed name filings that show a business's name and who owns it.
What moves the price most is the ground work, the size of the slab, any old concrete that has to be broken out and hauled off, and the finish you pick. Truck access matters too, because most streets here let the truck back up to a driveway, but a backyard patio with no side access may mean pumping the concrete over the house. The schedule turns on the permit when there is one, the rain and the cure time, and your written estimate spells out what's included and what isn't. We work the same way east of here in Mont Belvieu and across the other cities around Atascocita.
Why Channelview slabs crack, sink and hold water
Most of the ground around here is clay, and clay soaks up stormwater poorly, so after a hard rain the water sits around and under a slab instead of draining away. That soft, wet clay is what lets a driveway drop at one corner or a patio tip toward the house. We dig past it to firm subgrade, the soil the slab actually rests on, then bring in base rock and pack it in layers before anyone talks about the finish.
The other thing we see is old concrete poured with the slope running the wrong way, so water pools at the garage door or the back step. When we replace it, I set the fall away from the house before anything else.
How a concrete job runs when you call us in Channelview
From your first call to the final walk-through, here's what happens and who you'll be dealing with along the way.
Call or send the form
We get back to you and set a time for me to come out to your place in Channelview. You don't have to be home for the visit, but it helps if you want to walk the drainage with me.
I measure and check the ground
I come out myself to measure, look at the ground and where the water goes, and confirm which office handles your address. You get a written estimate with what's included and what isn't spelled out, so you know the full price before anything starts.
We build the base and pour
Our crew digs out, packs the base and sets the forms and rebar, the steel bars that hold the slab together if it cracks. I'm on site and check all of it before the truck pours, because nothing under a slab can be fixed afterward.
We walk the job together
Once the concrete has cured, we walk the finished work with you and go over when it's ready for feet and when it's ready for cars. You'll see the slope, the joints and the finish, and I'll answer anything you want to ask.
Questions about concrete work in Channelview
How much does a new concrete driveway cost in Channelview, TX?
We price driveways on site, because the biggest cost on most Channelview jobs is the ground work under the slab, and I can't size that until I've seen it. If the budget is tight, cut the finish before you cut the base, because a plain broom finish on a well-packed base will outlast a stamped surface poured over raked dirt. Call (713) 325-6337 and I'll come measure.
Do I need a permit to pour a driveway in Channelview?
You might, because the Harris County Engineer's permit list includes a residential construction application that covers driveways, culverts and access drives. Where a driveway crosses a roadside ditch there's usually a culvert pipe involved, so I look at that on the estimate visit and we help with the paperwork when it applies.
How often does Harris County flood, and does it affect a new slab?
On average a major flood hits somewhere in Harris County every two years, and flooding is the county's number one natural threat. For a slab, that puts drainage first, so we slope it to move water away from the house. If your lot is in the floodplain, the county lists an as-built certificate as required for development there, so I check your lot before we plan the work.
What is the best time of year to pour concrete in Channelview?
You can pour here most of the year, but drier months make scheduling easier, since around Houston February averages the least rain and June the most, out of about 52 inches in a normal year. In summer we start early in the morning, because concrete finished in midday heat can dry too fast and leave a weak, dusty top.
How long before I can drive on a new concrete driveway in Channelview?
You'll walk on it well before you drive on it, and I give you both dates before we pour, because they depend on the mix and that week's weather. Curing is the time concrete needs to gain strength after it hardens, and a car on it too early can crack it or leave marks, so plan to park on the street until it's ready.
What causes concrete driveways to crack in Channelview, and will a new one crack too?
Most bad cracks here come from a base that settled under the slab, and a new slab will still crack a little, so we plan where. We cut control joints, shallow grooves sawn into the surface, early enough that the slab cracks along those lines instead of across the middle. The packed base and the rebar keep any crack that does form tight and level.
Humble, TX
Call about your Channelview concrete job
Booking ahead of the wettest part of the year leaves room to pour on dry days instead of waiting out the rain.